Wireless Flood Alarm 2


100 in stock

Unique Protect-800 Wireless Flood Alarm 2 comprising of:
  • 1 x Float Switch (housed within a plastic box).
  • 1 x Battery powered MT Wireless Transmitter (connected to the Flood Sensor by 3 metres of Cable).
  • 1 x Outdoor Receiver (powered by a plug on 12v transformer) & Remote Control.
  • 1 x Wireless Siren & Flashing Strobe (which would be connected to the outdoor receiver by cable).
How it Works:
  • The Float Switch is housed inside a plastic box (which has a hole in the bottom and two sides), the box is designed to stop rain and snow from triggering the sensor and would be mounted in a location where potential Flood Water needs to be monitored.
  •  The Float Switch is connected to the battery powered Wireless Transmitter by 3 metres of Cable positioning it well above Flood Water, the Transmitter is housed inside a waterproof plastic mounting box.
  •  The Outdoor Receiver is powered by a 12v DC plug in transformer (the cable can enter the box through waterproof glands at the bottom or from the rear panel) and is fully weatherproof so can be mounted inside or outside of a building, connected to this Receiver is a Wired Siren & Flashing Strobe. The Receiver is Armed & Disarmed using a long range 800 metre Remote Control supplied (more can be added).
  •  The duration of the Siren (when triggered) is fully adjustable from seconds, minutes to latching, in Flood Alarms we would normally recommend a latching Siren. The Siren can be turned of at any time by using the long range Remote Controls.
  •  The Siren can also be triggered by anyone owning a Remote Control by using the SOS Button which could be useful in any Security & Medical emergency.
  • If Flood Water reaches the Sensor, a Wireless signal will be transmitted up to 800 metres line of sight (which equates to around 400 – 600 metres in many applications) back to the Receiver, if the Receiver is Armed the Siren will activate for the programmed duration (or until it is disarmed using a remote control)
The Outdoor Receiver has two channels so also could be used with additional sensors resulting in a better return of the investment, this second channel could be used for:
  • Outdoor Alarms.
  • Long Range Gate & Door Bells.
  • Security Lighting.

There are many Protect-800 Sensors that could be added, these include:

  • PIR’s
  • Vehicle Probes
  • MT Transmitter
  • Gate Contact & Transmitters
  • PIR in a Bird Box
  • Transmitter Board

The operating range between these Sensors & the Receiver are all 800 metres (line of sight) which equates to around 400 – 600 metres in most applications.



The duration of the 12v DC Outputs is fully adjustable (by selecting combinations of the internal dip-switches) from 1 seconds to Latched ON, the full list is as below:

  • 1 second or minute.
  • 3 seconds or minutes.
  • 10 seconds or minutes.
  • 15 seconds or minutes.
  • 20 seconds or minutes.
  • 30 seconds or minutes.
  • Latched ON (until disarmed using the remote control).

Remote Control:

The specially designed remote control supplied with this Outdoor Receiver has the following features:

  • Arm & Disarm either channel on the Outdoor Receiver.
  • Trigger a optional SOS button which would activate the connected accessories (regardless of if the receiver is disarmed) which could be a Siren, Buzzer, Floodlight or any 12v DC device. This device would latch on until the OFF Button is pressed on any Remote Control paired to the Receiver.
  • The Remote Control has an intelligent Feedback LED Indicator which confirms that the signal you have sent to the Outdoor Receiver is successful.
  • Additional Remote Controls can be added (there is no limit).
  • The operating distance between the Remote Control & Outdoor Receiver is 800 metres (line of sight) which relates to around 400 – 600 metres in most applications. This allows you to Disarm the Receiver before passing through a Protect 800 Detector, or Arming the Receiver after leaving the premises.
  • Powered by two standard AAA Batteries (supplied).
Standard Indoor Receivers:
  • You can also add the standard Indoor Receivers to this system allowing you to have notification inside the house (regardless of if the Outdoor Receiver is Armed or Disarmed).
  • This is a unique Flood Alarm !!

kit Includes:

  • 1 x Outdoor Receiver (P800-WSR/1).
  • 1 x Remote Control (P800-WSK/1).
  • 1 x 12v DC Plug in Power Supply.
  • 2 x AAA Batteries.
  • 1 x Float Switch.
  • 1 x Plastic Box.
  • 1 x MT Transmitter in a Mounting Box.
  • 1 x Wired Siren & Strobe.



  • Weatherproof: Yes.
  • Power Supply: 12v 5 amp DC.
  • Weatherproof Cable Entry Glands: Yes.
  • Channels: 2.
  • Sensors per Channel: 4.
  • Operating Range: 800 metres (line of sight).
  • Arming & Disarming Method: Remote Control.
  • 12v DC Outputs: 2.
  • Output Duration:
  • 1 second or minute.
  • 3 seconds or minutes.
  • 10 seconds or minutes.
  • 15 seconds or minutes.
  • 20 seconds or minutes.
  • 30 seconds or minutes.
  • Latched ON (until disarmed using the remote control).
  • Duration Selection: Internal Dip-switches.
  • Frequency: 869.400 – 869.650 MHz.
  • Size: 170 x 125 x 60 mm.

Remote Control:

  • Operation:
  • Channel 1 Arm, Disarm & SOS.
  • Channel 2 Arm, Disarm & SOS.
  • Power Supply: 2 x AA Batteries (supplied).
  • Size: 85 x 40 x 25 mm.
  • Transmission Range: 800 metres (line of sight).
  • Multiple Remote Control Operation: Yes (no limit).
  • Feedback Indicator: Yes (it confirms a successful operation).
  • Frequency: 869.400 – 869.650 MHz.
  • Wall Bracket: Yes (supplied).

MT Transmitter:

  • Wireless Range: 800 metre (line of sight).
  • Power Supply: 1 x 3v Lithium CR123A Battery.
  • Battery Life: 12 – 18 months (most applications).
  • Size: 65 x 33 x 15 mm.
  • Activation Methods:
  • Wired Input: Yes (N/O Momentary Volt Free, when used as a circuit board).

MT Mounting Box:

  • Material: Plastic.
  • Weatherproof: IP65.
  • External Size: 150 (L) x 85 (W) x 34 (D) mm.
  • Internal Size: 106 (L) x 76 (W) x 28 (D) mm.
  • Label: V range.

Float Switch:

  • Material: Stainless Steel.
  • Height: 75 mm.
  • Depth: 75 mm.
  • Fixing Method: Rear Nut.
  • Diameter of Rear Mounting Thread: 9.6 mm.
  • Output: N/O or N/C.

Float Switch Box:

  • Material: Plastic.
  • IP Rating: IP66.
  • Size: 100 (W) x 100 (L) x 60 (D) mm.
  • Holes: Bottom & Side.


  • Siren Level: 100 Decibel.
  • Flashing Strobe: Yes.
  • Size: 70 x 45 x 120mm.
  • Cable: Twin (3 metres).
  • Power Requirements: 12v DC.
  • Colour: Red & White.
  • Internal & External.
Be the first to review “Wireless Flood Alarm 2”

Your email address will not be published. Required fields are marked *


There are no reviews yet.

Main Menu

Wireless Flood Alarm 2


Add to Cart