Two Entrance Wireless Commercial Doorbell Kit Loud Bell, Siren & Indoor Chime Receiver

£751.81

100 in stock

  • A Two Entrance Wireless Commercial Doorbell with a Loud Bell (for one entrance), a Siren & Strobe (for the second entrance) and an Indoor Chime Receiver (for both entrances). This allows you to know where the Visitor is.
This unique Commercial Doorbell Kit includes the following (although we could adapt this system in many ways for different applications):
  • 2 x H/Duty Push Buttons & Battery Powered 800 metre Transmitters.
  • 1 x Unique Weatherproof Wireless Receiver & Remote Control.
  • 1 x Loud 85 Decibel Weatherproof Bell.
  • 1 x Loud Siren & Flashing Strobe.
  • 1 x Indoor Chime Receiver.
  • The duration of the weatherproof Bell & Siren are fully adjustable and controlled using the long range Remote Control supplied. When Armed the Bell or Siren will activate for the chosen duration (depending on which doorbell has been pressed), the duration for the Bell & Siren can also differ. They you can be activated at any time using the SOS Button on the Remote Control if required.
  • The Internal Receiver will also chime (choice of 32 different chimes with volume control) ideal for placing into a different office or area, this Receiver will also identify which Doorbell has been pressed by playing a different chime and illuminating a different LED on the Receiver.

Push Button:

  • The Heavy Duty Steel Push Buttons (with Please Ring embossed onto them) are connected to Battery Powered Wireless Transmitters (which are located inside plastic boxes) by 3 metres of Cable. This allows you to fit the Push Buttons into the most desirable location and the Transmitters into a safe location suitable for wireless Transmission.
  • The Transmission range between the Transmitters & Wireless Receivers is an impressive 800 metres (line of sight), which equates to around 400 – 600 metres in most applications.
  • The Wireless Transmitters are powered by a 3v CR123A Battery (supplied) which would last 12 – 18 months in most applications.
  • Further Push Buttons & Transmitters could still be added to cover different entrances, please Contact Us for Advice !!

How it Works:

  • When either H/D Push Button is pressed a Wireless signal is transmitted to both the Receivers, if the Outdoor Receiver is in the Armed status then the Loud 85 Decibel Bell or Siren & Flashing Strobe (depending on which doorbell has been pressed) will activate for the chosen duration (these can be turned off by the owners or staff before the duration has elapsed by using a special long range (800 metre) remote control.
  •  The owner or staff could also trigger the Bell & Siren using the SOS Button on the Remote Control (supplied) in the event of a Medical or Security emergency, in these situations the Bell & Siren will stay latched ON until they are turned OFF using the remote control which could be a useful additional Safety procedure (more remote controls can be added).
  • The fully weatherproof Outdoor Receiver is powered by a Plug in 12v Transformer (the cable can enter the box through waterproof glands at the bottom or from the rear panel) and controlled by a special long range (800 metre) Remote Control.
  •  The Internal Chime Receiver works regardless of if the Bell Receiver is turned ON or OFF.

Duration:

 

The duration of the Bell & Siren are fully adjustable (by selecting combinations of the internal dip-switches) from 1 seconds to Latched ON, the full list is as below:

  • 1 second or minute.
  • 3 seconds or minutes.
  • 10 seconds or minutes.
  • 15 seconds or minutes.
  • 20 seconds or minutes.
  • 30 seconds or minutes.
  • Latched ON (until disarmed using the remote control).
Outdoor Receiver:
The Outdoor Receiver has two channels with a 12v Output, each channel can be operated by up to four Protect-800 Sensors, these include:
  • PIR’s
  • Vehicle Probes
  • MT Transmitter
  • Gate Contact & Transmitters
  • PIR in a Bird Box
  • Transmitter Board

Remote Control:

 

The specially designed remote control supplied with this Outdoor Receiver has the following features:

  • Arm & Disarm either channel on the Outdoor Receiver.
  • Trigger a optional SOS button which would activate the connected accessories (regardless of if the receiver is disarmed) which could be a Siren, Buzzer, Floodlight or any 12v DC device. This device would latch on until the OFF Button is pressed on any Remote Control paired to the Receiver.
  • The Remote Control has an intelligent Feedback LED Indicator which confirms that the signal you have sent to the Outdoor Receiver is successful.
  • Additional Remote Controls can be added (there is no limit).
  • The operating distance between the Remote Control & Outdoor Receiver is 800 metres (line of sight) which relates to around 400 – 600 metres in most applications. This allows you to Disarm the Receiver from most locations within the business.
  • Powered by two standard AAA Batteries (supplied).
Indoor Receiver:
The 4-channel Wireless Receiver is packed with features to help you monitor & protect your Home & Business, these features include:
  • 800 metre Wireless Reception.
  • Adjustable Volume (from low to approximately 85 decibel).
  • 32 optional Melodies.
  • Mains Powered using a Plug in Transformer (3-pin UK & 2-pin European supplied).
  • Optional Battery Back Up using 4 x AAA Batteries (not supplied).
  • LED Notification of Loss of Mains Power.
  • Low Battery Notification.
  • Up to 16 Detectors can be Used.
  • Multiple Receivers can be used (no limit).
  • Zone Indicator (visual and by chime).
  • 4 x Dry Relay Outputs (can be used to trigger Diallers, Flashing LED’s, Siren’s, Bells etc).
  • 12v DC Output (can be used to trigger Flashing LED’s, Siren’s, Bells etc).
  • Relay Duration: Momentary.
  • 12v DC Output with adjustable Duration (5, 30 & 60 seconds or 10 minutes).
  • Can be Wall or Desk Mounted.
  • PIR Battery Check.
  • Optional Pause Modes.
  • This is a unique Outdoor Receiver which can be used in so many types of applications !!

kit Includes:

  • 1 x Outdoor Receiver (P800-WSR/1) & Power Supply.
  • 1 x Remote Control (P800-WSK/1).
  • 2 x AAA Batteries.
  • 2 x MT Transmitters (in a box).
  • 2 x Heavy Duty Push Buttons (embossed with Please Ring) & 3 metres of Cable.
  • 1 x Set of Screws.
  • 1 x 85 Decibel Bell.
  • 1 x Wired Siren & Flashing Strobe Light.
  • 1 x Chime Receiver & Power Supply.

Specifications:

Outdoor Receiver:

  • Weatherproof: Yes.
  • Power Supply: 12v 5 amp DC.
  • Weatherproof Cable Entry Glands: Yes.
  • Channels: 2.
  • Sensors per Channel: 4.
  • Operating Range: 800 metres (line of sight).
  • Arming & Disarming Method: Remote Control.
  • 12v DC Outputs: 2.
  • Output Duration:
  • 1 second or minute.
  • 3 seconds or minutes.
  • 10 seconds or minutes.
  • 15 seconds or minutes.
  • 20 seconds or minutes.
  • 30 seconds or minutes.
  • Latched ON (until disarmed using the remote control).
  • Duration Selection: Internal Dip-switches.
  • Frequency: 869.400 – 869.650 MHz.
  • Size: 170 x 125 x 60 mm.

Remote Control:

  • Operation:
  • Channel 1 Arm, Disarm & SOS.
  • Channel 2 Arm, Disarm & SOS.
  • Power Supply: 2 x AA Batteries (supplied).
  • Size: 85 x 40 x 25 mm.
  • Transmission Range: 800 metres (line of sight).
  • Multiple Remote Control Operation: Yes (no limit).
  • Feedback Indicator: Yes (it confirms a successful operation).
  • Frequency: 869.400 – 869.650 MHz.
  • Wall Bracket: Yes (supplied).

Push Buttons:

  • Size: 85 (L) x 40 (W) x 40 (D) mm.
  • Contact Type: NO or NC.
  • Sealed Wired Contacts.
  • Laser Etched Legend; Please Ring.
  • Weatherproof: Yes.
  • IP 67.

Transmitters:

  • Wireless Range: 800 metre (line of sight).
  • Power Supply: 1 x 3v Lithium CR123A Battery.
  • Battery Life: 12 – 18 months (most applications).
  • Size: 65 x 33 x 15 mm.
  • Activation Methods:
  • Wired Input: Yes (N/O Momentary Volt Free, when used as a circuit board).

Mounting Boxes:

  • Material: Plastic.
  • Weatherproof: IP65.
  • External Size: 150 (L) x 85 (W) x 34 (D) mm.
  • Internal Size: 106 (L) x 76 (W) x 28 (D) mm.
  • Label: V range.

Chime Receiver:

  • Wireless Operating Range: 800 metres (line of sight).
  • Adjustable Volume: Yes (from low to approximately 85 decibel).
  • Melody Options: 32.
  • Power Supply: 3-pin UK & 2-pin European Transformer Supplied.
  • Battery Back Up: Yes 4 x AAA Batteries (not supplied).
  • Loss of Mains Power Notification: Yes (LED).
  • Low Battery Notification: Yes.
  • Maximum Number of Detectors Can Be Used: 16.
  • Multiple Receivers can be used: Yes (no limit).
  • Zone Indicator: Yes (visual and by chime).
  • Dry Relay Outputs: 4 (N/O & N/C Momentary).
  • 12v DC Output with adjustable Duration (5, 30 & 60 seconds or 10 minutes).
  • Relay Duration: Momentary.
  • Mounting Method: Wall or Desk Mounted.
  • PIR Battery Check: Yes.
  • Optional Pause Modes: Yes.
  • Input Voltage: 12v DC 500 mA.
  • Frequency: 869.400 – 869.650.

Bell:

  • Power Supply: 12v DC.
  • External: Yes.
  • Size: 150 mm Diameter x 60 mm Deep.
  • Mounting Bracket: 4 x Holes.
  • Volume: Approx 85 Db.

Siren:

  • Siren Level: 100 Decibel.
  • Flashing Strobe: Yes.
  • Size: 70 x 45 x 120mm.
  • Cable: Twin (3 metres).
  • Power Requirements: 12v DC.
  • Colour: Red & White.
  • Internal & External.
Be the first to review “Two Entrance Wireless Commercial Doorbell Kit Loud Bell, Siren & Indoor Chime Receiver”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

Main Menu

kloi

Two Entrance Wireless Commercial Doorbell Kit Loud Bell, Siren & Indoor Chime Receiver

£751.81

Add to Cart